Posts by Collection

Fluorescence-Enhanced Bio-Detection Platforms Obtained Through Controlled Step-by-Step Clustering of Silver Nanoparticles

Published in Nanoscale, 2018

This study demonstrates the development of fluorescence-enhanced bio-detection platforms through controlled clustering of silver nanoparticles.

Recommended citation: Panpan Liu, Ying Zhou, Min Guo, Shuguang Yang, Olivier Félix, David Martel, Yiping Qiu, Ying Ma, Gero Decher. (2018). "Fluorescence-Enhanced Bio-Detection Platforms Obtained Through Controlled Step-by-Step Clustering of Silver Nanoparticles." Nanoscale.
Download Paper

Inkjet Process for Conductive Patterning on Textiles: Maintaining Inherent Stretchability and Breathability in Knit Structures

Published in Advanced Functional Materials, 2019

This paper presents an inkjet printing process for conductive patterning on textiles, preserving stretchability and breathability in knit structures.

Recommended citation: Inhwan Kim, Hasan Shahariar, Wade F. Ingram, Ying Zhou, Jesse S. Jur. (2019). "Inkjet Process for Conductive Patterning on Textiles: Maintaining Inherent Stretchability and Breathability in Knit Structures." Advanced Functional Materials.
Download Paper

Kirigami-Inspired Textile Electronics: K.I.T.E.

Published in Advanced Materials Technologies, 2019

An exploration of kirigami-inspired designs in textile electronics for wearable applications.

Recommended citation: Ying Zhou. (2019). "Kirigami-Inspired Textile Electronics: K.I.T.E." Advanced Materials Technologies.
Download Paper

Low-Profile Strip-Loaded Textile Antenna with Enhanced Bandwidth and Isolation for Full-Duplex Wearable Applications

Published in IEEE Transactions on Antennas and Propagation, 2020

An analysis of a low-profile strip-loaded textile antenna designed to enhance bandwidth and isolation in wearable applications.

Recommended citation: Ying Zhou. (2020). "Low-Profile Strip-Loaded Textile Antenna with Enhanced Bandwidth and Isolation for Full-Duplex Wearable Applications." IEEE Transactions on Antennas and Propagation.
Download Paper

Efficient Sub-15 nm Cubic-Phase Core/Shell Upconversion Nanoparticles as Reporters for Ensemble and Single Particle Studies

Published in Nanoscale, 2020

This research introduces a novel core/shell nanoparticle design for use as efficient reporters in biological imaging.

Recommended citation: Meiling Tan, Melissa-Jane Monks, Dingxin Huang, Yongjun Meng, Xuewen Chen, Ying Zhou, Shuang-Fang Lim, Christian Würth, Ute Resch-Genger, Guanying Chen. (2020). "Efficient Sub-15 nm Cubic-Phase Core/Shell Upconversion Nanoparticles as Reporters for Ensemble and Single Particle Studies." Nanoscale.
Download Paper

Direct-Write Spray Coating of a Full-Duplex Antenna for E-Textile Applications

Published in Micromachines, 2020

This paper presents the direct-write spray coating method for full-duplex antennas in e-textile applications.

Recommended citation: Ying Zhou, Saber Soltani, Braden M. Li, Yuhao Wu, Inhwan Kim, Henry Soewardiman, Douglas H. Werner, Jesse S. Jur. (2020). "Direct-Write Spray Coating of a Full-Duplex Antenna for E-Textile Applications." Micromachines.
Download Paper

Microstructures in All-Inkjet-Printed Textile Capacitors with Bilayer Interfaces of Polymer Dielectrics and Metal–Organic Decomposition Silver Electrodes

Published in ACS Applied Materials & Interfaces, 2021

A study on the microstructures in all-inkjet-printed textile capacitors with bilayer polymer dielectric interfaces and silver electrodes.

Recommended citation: Inhwan Kim, Beomjun Ju, Ying Zhou, Braden M. Li, Jesse S. Jur. (2021). "Microstructures in All-Inkjet-Printed Textile Capacitors with Bilayer Interfaces of Polymer Dielectrics and Metal–Organic Decomposition Silver Electrodes." ACS Applied Materials & Interfaces.
Download Paper

Airbrushed PVDF–TrFE Fibrous Sensors for E-Textiles

Published in ACS Applied Electronic Materials, 2021

This study investigates the airbrushing method for creating PVDF–TrFE fibrous sensors for integration into e-textiles.

Recommended citation: Braden M. Li, Beomjun Ju, Ying Zhou, Caitlin G. Knowles, Zoë Rosenberg, Tashana J. Flewwellin, Furkan Kose, Jesse S. Jur. (2021). "Airbrushed PVDF–TrFE Fibrous Sensors for E-Textiles." ACS Applied Electronic Materials.
Download Paper

Interconnected Cathode-Electrolyte Double-Layer Enabling Continuous Li-ion Conduction Throughout Solid-State Li-S Battery

Published in Energy Storage Materials, 2022

This paper presents a design for an interconnected cathode-electrolyte double-layer to enhance Li-ion conduction in solid-state Li-S batteries.

Recommended citation: Chaoyi Yan, Ying Zhou, Hui Cheng, Raphael Orenstein, Pei Zhu, Ozkan Yildiz, Philip Bradford, Jesse Jur, Nianqiang Wu, Mahmut Dirican et al. (2022). "Interconnected Cathode-Electrolyte Double-Layer Enabling Continuous Li-ion Conduction Throughout Solid-State Li-S Battery." Energy Storage Materials.
Download Paper

Design of Quasi-Endfire Spoof Surface Plasmon Polariton Leaky-Wave Textile Wearable Antennas

Published in IEEE ACCESS, 2022

This paper discusses the design and implementation of a quasi-endfire spoof surface plasmon polariton leaky-wave textile wearable antenna.

Recommended citation: Yuhao Wu, Saber Soltani, Busra Sennik, Ying Zhou, Galestan Mackertich-Sengerdy, Eric B. Whiting, Douglas H. Werner, Jesse S. Jur. (2022). "Design of Quasi-Endfire Spoof Surface Plasmon Polariton Leaky-Wave Textile Wearable Antennas." IEEE ACCESS.
Download Paper

Textile-Integrated Liquid Metal Electrodes for Electrophysiological Monitoring

Published in Advanced Healthcare Materials, 2022

Exploring the use of textile-integrated liquid metal electrodes for non-invasive electrophysiological monitoring applications.

Recommended citation: Braden M. Li, Brandon L. Reese, Katherine Ingram, Mary E. Huddleston, Meghan Jenkins, Allison Zaets, Matthew Reuter, Matthew W. Grogg, M. Tyler Nelson, Ying Zhou et al. (2022). "Textile-Integrated Liquid Metal Electrodes for Electrophysiological Monitoring." Advanced Healthcare Materials.
Download Paper

Nanoplasmonic Upconverting Nanoparticles as Orientation Sensors for Single Particle Microscopy

Published: March 01, 2018

This presentation covered the use of nanoplasmonic upconverting nanoparticles as orientation sensors in single particle microscopy. This topic explored the potential applications of nanoparticles in precise orientation sensing for advanced microscopy techniques.

All-Textile Antenna by Printing Method

Published: January 01, 2019

This poster presented the development of an all-textile antenna created through advanced printing methods. Presented at the ASSIST Meeting in January 2019 and again in November 2019, this work focused on wearable antenna applications through innovative textile integration.

Inkjet Printing on Multi-Capacitor

Published: October 01, 2019

This poster and presentation detailed the technique of inkjet printing on multi-capacitor structures for dielectric and piezoelectric applications. Presented at multiple CDP Meetings in October 2019, May 2020, October 2020, and June 2021, this work contributed to advancements in printed electronics and sensor technology.

Flexible Antenna via Printing Method

Published: November 29, 2022

This talk presented the development of flexible antennas created through innovative printing methods, highlighting potential applications in flexible electronics and wearable technology. The presentation was delivered at the Materials Research Society (MRS) Meeting, held from November 27 to December 4, contributing to advancements in flexible, printed antenna designs.

Teaching Assistant - Chemistry Experiments

Undergraduate Course, Donghua University, Department of Chemistry, 2015

Overview

As a Teaching Assistant for undergraduate chemistry courses, I helped students with hands-on lab experiments and theoretical concepts.

Teaching Assistant - Physics Courses

Undergraduate Course, North Carolina State University, Department of Physics, 2017

Overview

In this role, I provided teaching support for the following courses:

• PY 131 Lab: Conceptual Physics
• PY 212-001H: College Physics II

Research and Development (RDU) Experience

Research Role, North Carolina State University, 2019

Overview

As part of my role in the Research and Development Unit (RDU) at North Carolina State University, I was responsible for designing and implementing research projects for undergraduate students. This experience enhanced my ability to manage research processes, optimize experiments, and mentor students.